ajacobetti
10-02-2007, 11:36 AM
Operate CNC machining equipment, including set-up, adjustment, and tool change to produce parts of moderate to high complexity meeting documented specifications. Perform dimensional measurements to ensure compliance with manufacturing specifications. Document inspection results. Prepare tooling and/or fixtures for setups in advance by organizing and maintaining, "setup kits" for issued work orders.
PHYSICAL DEMANDS
Must occasionally be able to lift and/or move up to 65 pounds. Specific vision abilities required by this position, include close vision, depth perception, and the ability to adjust focus. Mechanical abilities include eye-hand coordination, and sufficient hand strength to assemble products.
WORK ENVIRONMENT
While performing the duties of this position, the employee routinely works near moving mechanical parts, and is exposed to fumes or airborne particles, toxic or caustic chemicals, and vibration. The noise level in the work environment is usually moderate.
(3) three positions (Machinists II)
The starting salary is $14 - $19 based on experience.
The 1st shift, one needed for Monday-Friday (8 hour days)
The 2nd shift, two needed has a 10 % shift differential on top of the base hourly rate and the hours are:
Monday-Thursday (10 hour days).
Please have any candidates send resumes and or call Ken Wanner at 561-207-6764
PHYSICAL DEMANDS
Must occasionally be able to lift and/or move up to 65 pounds. Specific vision abilities required by this position, include close vision, depth perception, and the ability to adjust focus. Mechanical abilities include eye-hand coordination, and sufficient hand strength to assemble products.
WORK ENVIRONMENT
While performing the duties of this position, the employee routinely works near moving mechanical parts, and is exposed to fumes or airborne particles, toxic or caustic chemicals, and vibration. The noise level in the work environment is usually moderate.
(3) three positions (Machinists II)
The starting salary is $14 - $19 based on experience.
The 1st shift, one needed for Monday-Friday (8 hour days)
The 2nd shift, two needed has a 10 % shift differential on top of the base hourly rate and the hours are:
Monday-Thursday (10 hour days).
Please have any candidates send resumes and or call Ken Wanner at 561-207-6764