|
View Full Version : Machine Down Need work done Bluesman 09-21-2007, 11:31 AM I should have posted this way from the start. I have a freind that has 2 Makino J88's And one is down hard for a long time. Anyone out there have the same type of Makino (or close) That we could send you the fixtures and the tools and programs and have you make parts for a few months??? Bluesman slatern44 09-21-2007, 04:33 PM Send over the part file and I will take a look. Thanks, Neil neil@slatermachine.com Bluesman 09-21-2007, 09:06 PM Send over the part file and I will take a look. Thanks, Neil neil@slatermachine.com When I get to work Monday Morning I will forward your e-mail to him. Theyb are machining V8 Engine blocks. And are at 50% cap. With the one machine down. They had a fire in the back panel and Makino says it will be months getting it back together. Bluesman RedGTZ 09-23-2007, 12:33 PM Please send drawing with all specifications to redgtz@hotmail.com and we'll see what we can do to help you out ;) Thank you! Bluesman 09-28-2007, 07:04 AM Please send drawing with all specifications to redgtz@hotmail.com and we'll see what we can do to help you out ;) Thank you! Guys thanks for the replys, we found some one local with the same tyoe of macine. We are out of the woods for now Bluesman RedGTZ 09-28-2007, 07:52 AM thank you for the update ;) |