Not sure if this is in the correct area but im looking at getting onme or two small parts machined, speciafically turned on lathe. Both parts will be of a max diameter of 12mm and a maximum length of around 60mm. Both made of aluminium or steel.
Anyone who can do the following preferably as cheap as possible, please contact

If "CHEAP" is what you are looking for, "CHEAP" is what you will get!
There are plenty shops out there that will work cheap, and, "YOU WILL GET CHEAPly MADE PARTS"

>I had a customer turn me down on a 4,500 piece order, he went with somebody that under quoted me, $0.04 per piece, he told me that the $180.00 he was saving by going to the other guy would pay a couple utility bills for his shop.

Three weks later, he e-mailed me, wanted to give me the order, needed parts in 10 days, said the other guy sent him scrap parts " HE GOT WHAT HE PAID FOR "

I DIDN'T HAVE MACHINE TIME AVAILABLE WHEN HE CALLED, OFFERED ME A $250.00 PREMIUM IF I RAN THE PARTS FOR HIM, I DIDN'T DO IT!
((((( YOU WANT CHEAPEST PRICE, YOU WILL GET IT ))))

Sorry, not with you. Im only wanting one to two parts machined.
A guy has generously offered to do me them in his spare time :rainfro:

Hello, I sent you a PM.

Steve

Good, fast, and cheap, pick any 2.




Good work fast won't be cheap.

Good work cheap won't be fast.

Fast work cheap won't be good.

Made in China

Amen to that.