I am looking for a quote for the following RC Truck beadlock rim. I have a complete one that can be used for exact measurements and will mail that to the machinist.

These are 6061 Aluminum and or Delrin beadlock rims.

Please send all quotes to sales@drasticsports.com

See pics for specifications.

Depending upon price I am looking at quantities of 200 to 500, maybe more. 1 unit consists of 1 beadlock rim and 2 rings.

Here is the complete rim, rings (2) with tire so you can see what the finished product looks like.

Here are the specs of the front of the beadlock rim, notice the groove that runs all the way around the outer edge:

Here are the specs for the back of the beadlock rim. Notice the hex in the center and the groove that runs all the way around the outer edge:

Here are the specs for the side of the beadlock rim. Notice the outside groove in the front and back.

Here are the specs for the ring that goes with the rim. Notice there are two rings for each rim. Notice the groove cut to the back of the ring to help hold the bead of the tire.

I have also enclosed a pic of the bolt that will be used to hold the ring to the rim. I will be getting my own bolts so that is NOT part of the quote.

The bolt is as follows:

M3-0.5 x 12mm Cl 10.9 ISO 7380 Pln Button Head Socket Screw
http://www.fastenal.com/web/products/detail.ex?sku=40870

how many?
how soon?

how many?
how soon?

Depending upon price, I am looking at quantities of 200 to 500, maybe more.
I don't need them right away, but prob within the next 30 days.

I sent you a PM.

Please use sales@drasticsports.com for all correspondence. It is much easier for me to keep it organized in Microsoft Outlook.

Hello, is this RFQ still open?

Please advise!

Regards!

i sent you an email and have gotten a response. should i PM you the info as well?

Please have any and all correspondence to sales@drasticsports.com by Sep 15th 2007.

I will be selecting a quote this week.

***It is important to note that I will be needing other wheel designs and seperate order of just rings as well. The wheel listed is just the initial job.
***

Thanks for all of the quotes, it is much appreciated.

I'm into RC crawling.

The rim looks nice mate, hope it turns out well for you.

Cheers

Ashley from Australia