We have obtained a Thermwood C50. It's a 3 axis system with Baldor dc servo motors models 4545 and 4535. They have voltages of 180 vdc. Mechanically it is sound but the control system doesnt work. Does anyone have some advice or options that might work to get this thing rollling again?

Tks

The Thermwood controller has a display screen that can be accessed from the keyboard to check the various inputs.If the controller is a 91000 or newer it should indicate the fault if the software can load and identify the problem.If there is absolutely no indication of life in the controller you need to call Thermwood their technical guys are very helpful and ought to know more about the machine than anybody.