I need qty 2 of these to start with out of 1018 CR steel for prototype purposes. Tolerances are .003" which should be easy to do. We will eventully bring this part in to production pending costs and slight design changes, ordering aprox 30-60 of these at a time every 2 months. I checked on material costs to give a rough idea I was quoted $6.84 a foot. Need a quote with you supplying the material, time frame, payment method, etc. We will close this quote on August 30, 2007.

Note: I'm not quite too sure how to post the 3d ipt file on here. I can also get you this file in auto cad dxf if required. Please let me know your email address if interested and I can email you the files. The aprox length of the part is 9.13" and major diameter of the solid is 2". The milling / drilling operations on the end with the threads does not need to be indexed any specific way in relation to the milled flat surfaces on the other end. Thanks!

Hello, we have sent you a PM with our contact info!
Please e-mail us your files.
Thank you in advance for the opportunity to bid on your RFQ

Regards

Thank you to Specialized Machine out of Souix Falls, South Dakota. They did an awsome job on our parts and were very professional through out the entire process. Thanks again!

Thank you to Specialized Machine out of Souix Falls, South Dakota. They did an awsome job on our parts and were very professional through out the entire process. Thanks again!

The last post before this one of yours was a month ago, It'd been PROFESSIONAL to inform everyone that the job had been awarded!!

(nuts)

.....quote with you supplying the material, time frame, payment method, etc. We will close this quote on August 30, 2007.

Is this RFQ still open?

> On today's post @ 8:10 am you say that Specialized Machine out of Souix Falls, South Dakota did an awsome job on your parts and on today's post @ 12:56 pm you say We will close this quote on August 30, 2007.
>> Are you looking for quotes on 30 and 60 pieces?

Please advise, and if it is still open, would you be so kind as to email us your files to applied.machineworks@yahoo.com

I look forward to hearing from you!
Regards:idea: could you also give me your steel source? I haven't found anyone that comes close to your material cost per foot!

Sorry this job has been awarded. The steel price was a quote from a local steel yard (we are in central Minnesota) no special pricing. We will be doing more RFQ in the near future and will keep the board updated. Thanks for all who participated in the bid.