Ok, What's the best post processor for Bobcad/cam ver21? Mach 3 post does wierd things and I don't trust it. Anybody?

Ok, What's the best post processor for Bobcad/cam ver21? Mach 3 post does wierd things and I don't trust it. Anybody?

Your Post Processor needs Modifying. Have you contacted BCC Support or Posted the their Forum??

You can get help in these Forums too.
http://cadcamtrainer.com/forums/index.php
http://216.117.147.20/bobcadsupport/forums/
http://cnczone.com/forums/forumdisplay.php?f=23&daysprune=1

I really don't know much about Mach2 but if the ISO settings in BobCAD aren't setup properly you will get weird things like crop circles etc.

This is the same with all software including Mastercam, Surfcam, and Catia. You have to read your Machine Control Manual and understand what you need BCC to output from the Post Processor.

Cheers!!!!!!:)