im new to this and have been googling for a while but havent really found much. could some1 possibly provide a few links to cnc hobby kits. the only thing that i want to do with it is cut/engrave platics and probably wont need anyting that big(actually the smaller the better.

http://www.taigtools.com/

http://www.imsrv.com/sherlinemachines/

http://www.kdntool.com/_sgg/f10000.htm

i found the x1 micro mill here:
http://www.kdntool.com/_sgg/m1_1.htm
what tools and parts would i need for assembly? or if someone could tell me where to get the parts from this tut
http://www.geocities.com/dsa_projects/handicrafts/cnc/cnc_table.html
thanks for the other links.