Hi everybody! I'm new on this forum. Running BP Series 1 with Mach3... So I'm making new lug nut for tooling(I'm going to use DIN2080 ISO30) of my bridgeport. So here some questions. First, what is spindles screw measure?

I have measures: 60.2mm diameter, 16 threads per inch = 1.588mm, 60degrees. Are these right?

http://vectron.homelinux.net/ant771/spindle/Spindle.JPG


And what is 60.2mm in inches? Should find picture how to make that screw with turn. I have screw making tables only for Metric-system...


Here's picture of spindle with lug nut. This machine is not mine, but samekind.
http://mysite.wanadoo-members.co.uk/hoodsmachiningpages/Series1Ret/CNC3.JPG

Is the nominal diameter 2 and 3/8 inches(60.325mm) ?

Had to make 5 testpieces before this final part! :D


http://vectron.homelinux.net/ant771/cnc/mutteri2.jpg

http://vectron.homelinux.net/ant771/cnc/mutteri_kiinni.jpg

Had to make 5 test pieces before this final part.. :D

Now it's possible to use DIN2080 - ISO30 toolholder.

http://vectron.homelinux.net/ant771/cnc/mutteri2.jpg
http://vectron.homelinux.net/ant771/cnc/mutteri_kiinni.jpg