Hello
I Have a question regarding A 1986 BMC-10 Hurco software V8.51 Ultimax I am having a problem with the tool change height. The spindle is about .125 to low and the sing arm hits the spindle when it tries to change a tool. Is there away to adjust this if so how. Any help would be great

Thank You
Michael

have you found the way to set the tool change height? there are several hidden screens to set various control parameters, including tool change height. call steve artzs at hurco (317-293-5309) or give me a call. Ron 207-610-6074 or sjmeyer@gwi.net