I need to have some bushings made.

Drawings here.

http://www.nwstp.com/jsm/b1.jpg


I will order in batches of 10 pieces.

I can supply material for the larger sizes, but it is probably cheaper to get locally than for me to ship the bars I have.

Anybody interested email a quote to jeff@nwstp.com or ty1295@insightbb.com with bried description of experience, machine. (just want to make sure someone isn't making with a chisel and rock. GRIN)

any questions there also.

Can possibly become a long term order for someone, with future new parts also.

Jeff Scott

I can get that done for you.

just want to make sure someone isn't making with a chisel and rock. I gave up the rock. They chip too much and it's hard to get a consistant 'smack' on that chisel, (bad ball-screws I think). I switched over to an oak branch instead. More consistant and I have a good working post for it. ;)

'Rekd

Originally posted by CNCadmin
I can get that done for you.

Shoot me an email with prices.

I need the medium size ASAP actually.