I recently bought a DM 2800, and plan to do a retro fit on it. I need the programing and the service-maintenance manuals. I know that I can get them from DM but they want $50 each for manuals and $25 for a Wiring Diagram., so thought I'd try here first, maybe pay someone for copy service.

I was able to download some DM manuals from a college in Mexico but they are all in spanish! These are Bench Mill DM2800, DM2016, Lathe DM3000, and Lathe DM3300-B suplement?. I can share these if anyone wants wants copy.
I also have the DM2400 Programing and the Service and Maintenance Manuals, and the DM2800 Wiring Diagram, which I can easily copy.

I've been benn searching for info and reading all the posts on DM retrofits, trying to get up to speed.
At work I have a 4 axis stepping motor machine that I built for a test stand. It operates from a PC with a National Instruments PCI Stepper / Servo Controller and NI Driver Boxes (IMS modules), 23 frame motors, a GPIB card for Network Analyzer, Programable DVM all controlled by LabView.
Thanks for any help.

I have the manual of dynamyte 2800, but my problems go far beyond the manual. Let's see if you can help and i try to help you too. I trying to set the comunication between my PC aand Mastercam. But I dont know now how to set the dynamite in receiving mode.