I am looking for someone to use their cnc machine to cut me some round circles most of them are 4-6 inches in diameter with a smaller whole in the center of each one. I will supply the material and shipping. Please email me back at JEmerson@cableone.net

I would do it myself but I was told I need a new controller board which is $1300 so please email me back if interested

Jason,
What type of material needs to be cut?
Tom

Jason, what kind of time frame are we looking at? Also, how many would you want?

More importantly, what sort of bucks.

I am looking for someone to use their cnc machine to cut me some round circles most of them are 4-6 inches in diameter with a smaller whole in the center of each one

My machine will only cut square circles. ( Sorry I couldnt help myself )

I would be happy to look at what you need. I have a machining center in the garage not doing anything right now
pettyprecision@yahoo.com

I can do this very cheap with a prima laser. I also have 14 ga. 304 ss drops that I can use for this at a very good price however I have a large assortment of other materials.

Jason - I know just what your doing, as I also build large experimental rockets. Check your email..........

Scott

Guys, he originally posted this request 2-1/2 YEARS ago.

So,
has this job been awarded yet?:stickpoke

More importantly, what sort of bucks.



My machine will only cut square circles. ( Sorry I couldnt help myself )


LMAO!!!!!!!!!!

I dont have that option in my programming software. Square circles must be something new.

Jason i just bought a series 2 bridgeport with heidenhain controls BUTT i didn,t get a schematic with it and need to change things for lower voltage. would you be able to help me? print number is1935749
thanks Dar
dcosand57@yahoo.com

Send me the drawings I can do this job for a resonable price.