Has anyone seen a cnc route kit for sale? Im talking about something around a 10x10 inch or so (cutting area)?

Here is one.

http://www.rcmodels.net/cnc/

I am also considering selling mine...if your interested in a previously owned one. Also it needs to be picked up. Too heavy to ship...

Eric

That's a cool looking machine.

Going to sell yours already!! Geez you just made it... You live in canada right?? Im in maine.......

I am considering building a new one out of aluminum. Maybe use servos and gecko's. I haven't decided yet.

Where in Maine?

Eric

I live near the capital. Augusta, Me 04330

Hey clean out your mail box.. cant send PM to you.....

Cleaned out.

You are 700 miles from me. Kinda far.

Eric

Thats ok. I think im going to build machine number 3. They only get better.. Going to build a gantry this time.

It's complaining that your mailbox is full...

Eric

-MDF machine frame
-all linear bearings/rail on every axis
-1/2-10 Acme leadscrews on each axis
-15x27 table
-13x25" cutting area
-325 drilled holes for clamping in a 12x24 grid
-about 275 of the drilled holes have steel treaded inserts for
clamps etc.(10-24)
-Stepperworld FET3 board
-27 volt PS with resistors
-48" per minute on x and y
-30" on z
-3.5" z travel
-1.25 HP router with variable speed control
-software controls the router on/off
-No computer included
-no measurable backlash on x, .0055" baclash on y. This can be fixed with a new y delrin nut. Currently I am compensating using backlash compensation in the software.

I would need $750.00 USD to part with it. I would also need some time, as I am not done with it yet. Also I would have to ask my wife...:) if I can build a new one first...:)

Eric

HEY,
Ya I emptyed my box too!!! lol.. Not a bad price. But im affraid shipping would kill me....

I shipped my machine it cost about 150.00 to ship a 24x36 wood router machine.