Mike, at Torchmate, could you give me the deminisons of the support slats, for the, 4x4, plasma table. My table should arrive, 6/27/06 and I want to ga and have the slats ready. Thanks for your help. Also, how many slats does it take.
Thanks

Sorry I did not see this post earlier, I was out of town at a customer's location. I'm sure you have gotten this taken care of, but I'll post up the correct dimensions for future reference:

Length: 55"
Height: 3"
Width: 3/16"
Amount: 16

Hi Mike,
I am little puzzled with 4 x 4 plasma table.
- 4 x 4 table means size 4 ft x 4 ft of working area. It's right or wrong.
- How much for this size?


Cheers,
Mongkol

Mongkol,

The Torchmate Thunderbolt 4x4 table has a working area of 49"x49". The overall size of the table is larger then that.

How much truly depends on the application you intend to be using the table for, and what options you need.