Hi There,

Can any1 help me with these manuals and schematics....I have just purchased the machine, and would like to get it going.

Kind Regards.

T_Rex

Hi
Tell me exactly what you need we have a fp42nc with dialogue 4 upgraded controller I have all the manuals and schematicts for this machine
Mark

Hi Burnzy,

I need the wiring diagram, my Deckel FP41NC has Siemens Simoreg DC Control cards fitted to it, but it sounds like your wire diagram will be pretty much similar...

I have no documentation on the machine....and would appreciate anything that you could give me :)

Kind Regards.

John

Hi T rex
Sorry about the delay I have photo copied the schematics book from the control cabinet and copied some drawings .There is another manual which is a fault finding manual I will copy this for you also I dont know how much it will cost to post it to you but I will let you know
mark

my email is monty@pnc.com.au
There is a guy in Canada with the same problem as you can you pass the info to him

Hello T,

I have the drawings for the siemans drive in your machine. I have answered many of your questions before, on that other forum. But I get no responses from you after I give you something to try in order to fix your machine.

If I can be of help please contact me sentnermts@netscape.com .

Regards
DD