View Full Version : Contest Finalist here-


CNCadmin
04-03-2004, 09:42 PM
Wow, April 3 we hit 3,500 members. The following members post your guess for when we will hit 3,600.


InventIt
July_favre
Joe Petro
gaetan
muzleldr
boxwood


You have until 3,550 to post your guess!!!

If I have missed someone, let me know I will add them. If in the event that one of the above members does not post at the cut-off number, you are disqualified. Please post the date in this thread only; you may not edit the date once you have posted it, other wise you will be disqualified.

boxwood
04-03-2004, 09:53 PM
Hey you missed me my new guess is 4/5/04

CNCadmin
04-03-2004, 09:59 PM
Originally posted by boxwood
Hey you missed me my new guess is 4/5/04

Today is the 3rd not the 5th. You guessed april 5.

High Seas
04-03-2004, 10:00 PM
Tried to add mine earlir - got all finger tied!
04/04/04 @0404 or is that for the 4004th member - well, at least the numbers look nice together!

vacpress
04-03-2004, 10:20 PM
we should have a DESIGN contest. instead of an arbitrary contest that can be manipulated by registering fake users.... i guess thats a similar problem with the design contest.. how to enable secure voting. 1 vote per person..

CNCadmin
04-03-2004, 10:30 PM
Originally posted by vacpress
we should have a DESIGN contest. instead of an arbitrary contest that can be manipulated by registering fake users.... i guess thats a similar problem with the design contest.. how to enable secure voting. 1 vote per person..


Design contest (we all know you would win) good idea but not really fair most people don't have the experience do be competitive. Fake users? I can check every person who registers with the site and not only that you can only register once with the same email address. I could check the top 4 right now and confirm if that join under a bogus email/user name.

muzleldr
04-03-2004, 10:50 PM
you missed me my post was for 4/3/04 @7:45 pm cst. new gess is 4/27/04 CST

boxwood
04-03-2004, 11:11 PM
You need to look again looks like a 3 to me boss on page 9, doesnt really matter though my new guess is way off

Joe Petro
04-04-2004, 12:57 AM
April 12 2004


Joe Petro

gaetan
04-04-2004, 07:08 AM
Hi My guess is the 7 april 2004

CNCadmin
04-04-2004, 09:39 AM
Originally posted by boxwood
You need to look again looks like a 3 to me boss on page 9, doesnt really matter though my new guess is way off

You are correct, I missed you.

sol
04-04-2004, 11:29 AM
So...we reached 3500 members on April 3, 2004 at appx. 10:40 PM EST (U.S.)...
That was the fourth of April from New Zealand to Brazil!

Guess who posted his answer as 4-4-04 GMT rather than EST? :D

juaumu
04-04-2004, 06:10 PM
my guess for the 3600 is 4-8-04
from juaumu

july_favre
04-05-2004, 03:47 AM
Ill say the 6th of april

InventIt
04-05-2004, 07:58 AM
Guess I'll take the 8th

CNCadmin
04-06-2004, 07:17 AM
I looks like july_favre may win this one, will see.

CNCadmin
04-06-2004, 01:15 PM
Originally posted by july_favre
Ill say the 6th of april


You are the winner!!!

july_favre
04-06-2004, 03:19 PM
HOORAY!!!

boxwood
04-06-2004, 03:27 PM
Congrats...... July_Favre. Now we need a contest for some Geckos hint hint

CNCadmin
04-06-2004, 03:30 PM
That maybe closer than you think. :)

HomeCNC
04-06-2004, 04:24 PM
july_favre,

PM me your address when you get the chance.

CNCadmin
04-06-2004, 08:08 PM
A big thank you to Jeff for the donation of the servos!

Please support Jeff and his products at http://www.homecnc.info/ .

HomeCNC
04-14-2004, 12:00 PM
july_favre

I shipped your motors on Tuesday 4/13/04. Do you have a project to use them on?

july_favre
04-14-2004, 02:43 PM
At the moment I dont have a project for them, I just bought a couple maxncs that are being shipped right now. Im hoping within 2-3 months I can get a minimill to convert and then a few months after that get an even larger benchtop mill that I will probably just buy a completed kit for. I was thinking about just getting the larger machine since Im getting these servos, but I think they might be a little too week than Id like on there.

july_favre
04-16-2004, 10:17 PM
I just got the motors in today. Thanks cnczone home cnc and everyone who guessed wrong:)
hopefully I can put them to good use soon.

Tinker
06-30-2004, 03:50 PM
My Gues would be July3rd 2004