omegaghost
05-07-2007, 01:52 PM
hey there fellas i just completed my first lathe project a boring bar holder i thought this one might be a little diffrent from what you might have seen or not (nuts)anyhow just thought i would show you so pics http://i91.photobucket.com/albums/k303/omegaredghost/100_1384.jpghttp://i91.photobucket.com/albums/k303/omegaredghost/100_1383.jpghttp://i91.photobucket.com/albums/k303/omegaredghost/100_1385.jpgany how these are r8 collets that im useing. so one might be able to use any tool that will fit in one thought this might be useful to some one