begacon
05-03-2007, 10:08 PM
Who can know the difference of 2-Axis and 3-Axis of Vertical Mill Machine?
Please tell me...
Thanks
Please tell me...
Thanks
|
View Full Version : the Difference of 2-Axis and 3-Axis of Vertical Mill Machine begacon 05-03-2007, 10:08 PM Who can know the difference of 2-Axis and 3-Axis of Vertical Mill Machine? Please tell me... Thanks klysons 05-03-2007, 10:13 PM 2 axis is x and y, that is the table moves left and right, front to back. The third axis is generally Z, which moves the quill up and down. 4th would be the table moving up and down, 5th would be the head tilting, and so on. High Seas 05-10-2007, 10:23 AM Who can know the difference of 2-Axis and 3-Axis of Vertical Mill Machine? Please tell me... Thanks Here is a nice summary on Majosoft's page: Has pros and cons for you as well http://www.majosoft.com/engraving/html/choice.html begacon 05-10-2007, 12:48 PM Thanks very much klysons and High Seas. You guy help me to find the right answer in my last interview and I got a job ...I'm appreciate for your help...Thanks again... yair hen 07-29-2009, 05:10 PM Hello I have a turntable and I want to do a half circle I need help I have deskcnc Lean Machine 1600s Thanks Switcher 07-29-2009, 07:55 PM 2 axis is x and y, that is the table moves left and right, front to back. The third axis is generally Z, which moves the quill up and down. 4th would be the table moving up and down, 5th would be the head tilting, and so on. Wouldn't that (4th - axis) be a rotary axis (A)? ;) Superman 07-30-2009, 07:31 AM Hey switcher You are not expecting an answer are you ( NOV 2007 last post before hyjack ) someone has hyjacked an old thread :rolleyes: PS - it could be A, B, C or even W |