Hello guys.

This is the MM Mach3 profile that we use for the X3.


cheers


Frans

Syil Australia

thank you frans.

xushuo
Syil china

Hi

I tried this profile but I can't load the Mach3 with this one. When I choose this profile the Mach3 is opening with a blank layout and the only think you can see is the toolbar on the top. I tried to use it in a second PC but the same problem is still existed as well. Did any one else experienced any problems with it?

Yes, same problem here too! Blank screen on load with this profile using Mach 3 v2.00.65. Syil USA's inch profile works fine though.

Any ideas?

Mark

Blank, but you can open all dialogboxes from menu config. Writedown all configurations manually from the opened dialogboxes. Make new profile and change the value manually with the values from syiel au ;-).

I am just in the process of completing that. When I have finished and tested it I will post it on here for anyone who is interested.

Mark

I had the same problem of blank screen with just toolbar after loading Syil Australia profile. I fixed it by going to the "View" menu dropdown and selecting "Load Screens". From there I selected "1024.set". This appears to replace the "Mach Steel Blue" screen set with the original "1024" screen set in the profile xml file and fixes the problem. At least it did on 2 computers that I use, a Dell laptop and a AMD powered desktop machine. Hope this helps.