View Full Version : ****WIN 3- 360oz/in Servo's W/encoder***
CNCadmin 03-31-2004, 12:07 PM Win 3- 360 oz/in servos with USDigital 250 CPR encoders on them.
Rules- You must pick the date that CNCzone will reach 3,500 members. Please post the date in this thread only; you may not edit the date once you have posted it, other wise you will be disqualified. Only registered member may enter. If their is a tie of more than one, than only those who tied will be allowed to pick another target date for xxx amount of members given.
This thread will be closed to posts when the site hits 3450 members so get posting your guess!!
The servos are courtesy of "HomeCNC" (http://cnczone.com/forums/member.php?s=&action=getinfo&userid=150)
IMPORTANT NOTE!! Please check to make sure your email address is up-to-date, if not please go into "my CNCzone" and make the needed change.
WsW-WYATT 03-31-2004, 12:17 PM 5/3/2004
wozzwinkl 03-31-2004, 12:17 PM April 17th, 2004
willard 03-31-2004, 12:19 PM June 1st 2004
btuman 03-31-2004, 12:20 PM june 28, 2004
awilcox 03-31-2004, 12:21 PM 30Apr04
mhackney 03-31-2004, 12:21 PM My pick is April 5th at 2:15pm (in case there is a tie!)
Bloy2004 03-31-2004, 12:22 PM April 20th, 2004
Erm, I'll got for April 15th 2004, since it's my birthday:)
Bloy2004 03-31-2004, 12:24 PM Hah! good one, Michael!
hddjohns 03-31-2004, 12:25 PM May 22, 2004, 10:01:00
Al_The_Man 03-31-2004, 12:27 PM May 1st 2004
tbcsoul 03-31-2004, 12:27 PM 19th of April at 5pm GMT
snokid 03-31-2004, 12:27 PM april 12th
Bob
mikeschn 03-31-2004, 12:28 PM I'll say April 14th, 2004!!! Approx 3 months and 12 days from my birthday! ;-)
Mike...
jim fuchs 03-31-2004, 12:28 PM june 27 04 4.00 pm
webnrrd2k 03-31-2004, 12:29 PM June 15, 2004
marvinstov 03-31-2004, 12:29 PM April 21
CamIam 03-31-2004, 12:29 PM I guesstimate April 10, 2004
mp2526 03-31-2004, 12:34 PM April 8th, 2004
cmikey 03-31-2004, 12:34 PM April 23, 2004
peterlou41 03-31-2004, 12:35 PM 14 Juin 2004 :p
jasonn 03-31-2004, 12:35 PM APRIL 27
yukonho 03-31-2004, 12:36 PM April 18
dajody 03-31-2004, 12:37 PM May 8
EvanRobert 03-31-2004, 12:38 PM May 3rd 2004 10:29PM in case of a tie.
imfool 03-31-2004, 12:38 PM April 18th, 2004
ED209 03-31-2004, 12:38 PM JUNE 22 2004
tpicker1 03-31-2004, 12:41 PM 06/18/2004 18:00
matth 03-31-2004, 12:43 PM April 24th 2004, the day of my wedding!!
nicad 03-31-2004, 12:43 PM April 4th, 2004
(4/4/4). :)
Ken_Shea 03-31-2004, 12:45 PM April 6, 2004
jeffsmith 03-31-2004, 12:46 PM May 7th
SteveJ 03-31-2004, 12:46 PM 4 April
Steve J.
DareBee 03-31-2004, 12:47 PM June 8, 2004
sp00k1e 03-31-2004, 12:50 PM April 28, 2004
mrclick 03-31-2004, 12:54 PM 31 march 2004
gbennett 03-31-2004, 12:57 PM April 23rd
njtermite 03-31-2004, 12:59 PM April 4, 2004
jimmyd7 03-31-2004, 01:00 PM May 11, 2004 @ Noon...
sneuri 03-31-2004, 01:00 PM April 9, 2004
jdebuck 03-31-2004, 01:02 PM April 26, 2004
whiteriver 03-31-2004, 01:03 PM April 7th
FRAMEDNLV 03-31-2004, 01:05 PM may 25, 2004
Just curious, Paul, how much they retail for?
buscht 03-31-2004, 01:07 PM May 5, 2004 3:00 pm
mtlmnchr 03-31-2004, 01:10 PM April 19th
billy bob 03-31-2004, 01:11 PM it will be on May 5
crazyman 03-31-2004, 01:14 PM jun4th/04
JWSmith 03-31-2004, 01:14 PM June 2, 2004. The day after my birthday since it was already taken.:)
John
trent2530 03-31-2004, 01:14 PM 1 June 2004
Cold Fusion 03-31-2004, 01:16 PM 7/26/04
Speling 03-31-2004, 01:23 PM april 21
cncnick 03-31-2004, 01:24 PM april 10th
wjbzone 03-31-2004, 01:24 PM 4/5/2004
(day after april fools)
DerMann 03-31-2004, 01:25 PM IŽd say june 4th 2004.
Best regards
Max
rsera 03-31-2004, 01:26 PM june 11
HaWee 03-31-2004, 01:32 PM june 18, 2004
boyd32450 03-31-2004, 01:34 PM April 29th 2004
awander 03-31-2004, 01:42 PM July 5, 2004
Kookaburra 03-31-2004, 01:42 PM April 15 2:25pm its my birthday and I should be full of beer by this time, lol
carpenter 03-31-2004, 01:46 PM 5-27-04
MaxxMan-X 03-31-2004, 01:48 PM April 20th
cncdave 03-31-2004, 01:51 PM April 27 @1:oo am
ggpipe 03-31-2004, 01:52 PM April 12, 2004
lsippell 03-31-2004, 01:52 PM 4/07/04
andybuch 03-31-2004, 01:55 PM April 25th
Andy
jemmyell 03-31-2004, 01:56 PM april 08, 2004
SteveD 03-31-2004, 01:57 PM June 10th 2004
Dad911 03-31-2004, 02:05 PM April 13th. My lucky number.
davesaudio 03-31-2004, 02:07 PM apr 4 4pm 2004
can the new members all originate from the same ip address?(wink)
;)
glmoore 03-31-2004, 02:14 PM May 21st 2004
itklas 03-31-2004, 02:16 PM June 25, 2004 7.30pm
Stoney 03-31-2004, 02:18 PM May 14 2004
Grumpy933 03-31-2004, 02:22 PM April 28, 2004 15:35 EST
JOE65 03-31-2004, 02:23 PM Apr. 17/04
tmasman 03-31-2004, 02:24 PM May 6, 2004
ezland00 03-31-2004, 02:26 PM April 22, 2004
Swede 03-31-2004, 02:28 PM April 18 2004!
Slippy 03-31-2004, 02:30 PM I'm going to say april 28th at 3:00 pm im thinking thats gonna be a lucky day :P
BIG AL 03-31-2004, 02:33 PM 4 th April 2004, 0600 hrs.
mvaughn 03-31-2004, 02:40 PM April 6th 2004 is my guess
ynneb 03-31-2004, 02:46 PM April 25th 2004 8:37 PM
mwalach 03-31-2004, 02:49 PM June 26th 2:30pm est
nickm85 03-31-2004, 02:53 PM May 10th
abdulardo 03-31-2004, 02:54 PM April 08 2004!
mysterious 03-31-2004, 02:54 PM May 2,2004
GBRAVO 03-31-2004, 02:57 PM May 21, 2004
Mike F 03-31-2004, 02:59 PM 7th May must be a possibility - could do with those servos.
ynneb 03-31-2004, 02:59 PM How unusual, 27 posts in this thread with only 1 post to their name?
bbuonomo 03-31-2004, 03:03 PM April 14th, 2004
steve692 03-31-2004, 03:04 PM July 9th, 2004
foamcutter 03-31-2004, 03:04 PM April,30,2004
Yraen 03-31-2004, 03:04 PM 6/6/2004
cnc2k 03-31-2004, 03:15 PM May 9, 2001
icekrk 03-31-2004, 03:18 PM May 16, 2004
Chagrin 03-31-2004, 03:18 PM May 23, 2004
jubee 03-31-2004, 03:19 PM May 14,2004
kearn 03-31-2004, 03:23 PM 21st April
CNCadmin 03-31-2004, 03:23 PM Originally posted by ynneb
How unusual, 27 posts in this thread with only 1 post to their name?
It's their 1st post in the forum, not so unusual, but if they don't have a vaild email they would'nt be gettting a email that they have won.
freemanb 03-31-2004, 03:27 PM april 16, 2004
tjstraz 03-31-2004, 03:36 PM June 3, 2004
Tim
boater 03-31-2004, 03:42 PM 11 May 2004
djake89701 03-31-2004, 03:46 PM I'll pick 05/16/2004
Stevie 03-31-2004, 03:47 PM 5 May 2004
CNCadmin 03-31-2004, 03:58 PM I pick april 6.
Guy's the site puts on 20-30 members A DAY.
mihau2x 03-31-2004, 04:03 PM hmmmm I don't now
balsaman 03-31-2004, 04:05 PM May 6, 2004. Sorry about all you other guys luck....
:)
Eric
bennylaird 03-31-2004, 04:11 PM 9th of May
Just cos it's the wifes birthday
Benny
jimini 03-31-2004, 04:15 PM may 20,2004 @12:00 noon for me.
BM.Marine 03-31-2004, 04:16 PM July 3rd, 2004
SimTech58 03-31-2004, 04:19 PM April 2nd 2004
aghobby 03-31-2004, 04:22 PM May 13 2004
Ferenczyg 03-31-2004, 04:22 PM May 14
Adam_b 03-31-2004, 04:25 PM April 6, 11:00pm
stevemac 03-31-2004, 04:27 PM APRIL 30 2004
STEVE
ptribbey 03-31-2004, 04:32 PM June 7th, 2004
bob1371 03-31-2004, 04:33 PM April 13, 2004
jschi 03-31-2004, 04:36 PM 6/21/04
Toolmaker 03-31-2004, 04:42 PM July,4th 2004
gopackgo 03-31-2004, 04:43 PM April 7, 2004
tagger99 03-31-2004, 04:47 PM 5/3/04
timewarp 03-31-2004, 04:50 PM may 19,2004
creative_mind 03-31-2004, 04:51 PM May 9, 2004
Makuna 03-31-2004, 04:56 PM May 5th, 2004, 7:49pm PST is my guess
natchez 03-31-2004, 05:00 PM 4/13/04
boxwood 03-31-2004, 05:00 PM 4/3/04
good luck all
yumaorbust 03-31-2004, 05:01 PM June 6 2004 1:00 pm
6105Moss 03-31-2004, 05:03 PM june 6th,2004
teilhardo 03-31-2004, 05:03 PM april 17th
CNCadmin 03-31-2004, 05:05 PM Originally posted by Rekd
Just curious, Paul, how much they retail for?
Have to get Jeff (homecnc) to post a picture for us.
emorsmor 03-31-2004, 05:13 PM April 23rd
bush666au 03-31-2004, 05:17 PM 3rd of may 2004
RRunyan 03-31-2004, 05:22 PM May 3rd, 2004 at 7:56am
Beezer 03-31-2004, 05:25 PM I choose May 4th , 2004 :D
tdpyro 03-31-2004, 05:27 PM April 21st
toolsalot 03-31-2004, 05:30 PM May 8th
cncfoam 03-31-2004, 05:35 PM april 14th 2004 at 12:15
Eric Z
ID cncfoam
brad3378 03-31-2004, 05:44 PM April 5th,
8:46 am
rimcanyon 03-31-2004, 05:45 PM May 30, 2004
-Dave
xracer51 03-31-2004, 05:48 PM June 21 , 2004 10:55 P.M.
Gonzo007 03-31-2004, 05:51 PM Sept 9 2004
slp_prlzys 03-31-2004, 05:58 PM 8th May 2004
haysys 03-31-2004, 06:04 PM June 9, 2004
poppy 03-31-2004, 06:08 PM 5/28/2004
WallCrawler 03-31-2004, 06:10 PM april 25
Konstantin 03-31-2004, 06:10 PM August 13 2004
tonylu 03-31-2004, 06:18 PM 06/13/2004
mintz 03-31-2004, 06:19 PM April 26 2004
Mintz
trubleshtr 03-31-2004, 06:25 PM april 1st happy fools day
strataxe 03-31-2004, 06:32 PM April 11th
escowizard 03-31-2004, 06:33 PM June 10th 11:am
DR-Motion 03-31-2004, 06:43 PM 25 April 2004 10 a.m.
maybe I'm not the first to choose this date but at least I'll be right... if I'm right
DLMACHINE 03-31-2004, 06:45 PM September 1,2004
THend 03-31-2004, 06:52 PM My guess is August 19, 2004
dart70ca 03-31-2004, 07:17 PM April 12, 11PM PST.
snaggletto 03-31-2004, 07:19 PM 10/01/04
mb0978 03-31-2004, 07:40 PM July 18, 2004
gaetan 03-31-2004, 07:55 PM 3 April 2004 before 10 a.m. :)
khasabog 03-31-2004, 07:56 PM April 15, 2004
DaDukeofoz 03-31-2004, 08:14 PM Lets see ... 3400 members thisafternon (AEST 12:15) ... I recon:
12/04/2004
Here's hoping ... :p
Joe Petro 03-31-2004, 08:20 PM April 3rd 2004
sentra52 03-31-2004, 08:24 PM JUne 26th is the magic day.....you can ship them now if you'd like:rainfro:
strat 03-31-2004, 08:25 PM april 5 2004
SJ781 03-31-2004, 08:31 PM April 2, 2004
P.Mcgyver 03-31-2004, 08:46 PM April,13,2004
CNCadmin 03-31-2004, 09:10 PM Originally posted by DaDukeofoz
Lets see ... 3400 members thisafternon (AEST 12:15) ... I recon:
12/04/2004
Here's hoping ... :p
By that time their will be 7,000 + members.
glentner 03-31-2004, 09:11 PM April 10th sounds about right.
mod-rn man 03-31-2004, 09:13 PM Might as well choose my Bday, May 7, 2004.
Cheers to all
intrusion 03-31-2004, 09:21 PM June 30,2004
@ 7:20 pm Pacific time
intrusion
mgdcnc 03-31-2004, 09:38 PM May 20, 2004
ninpofox 03-31-2004, 09:39 PM July 1, 2004
RickOmatic 03-31-2004, 10:13 PM April 16th 5:00pm
skeetboy25 03-31-2004, 10:34 PM june 12, 2004
smirob 03-31-2004, 10:39 PM April 28th, No particular reason, just hoping for dumb luck. ;)
WayneHill 03-31-2004, 10:42 PM April 25th - My wife's birthday - She would like 3 servos :)
cnc2k 03-31-2004, 10:53 PM on page 7 i wrote "may 9, 2001" i meant to say 2004
transdoc3 03-31-2004, 11:05 PM I take April 9th. @high noon in case of tie,Rick
Snipes44 03-31-2004, 11:07 PM June 12th 2004
nicad 03-31-2004, 11:16 PM CNCadmin-
hasn't been asked or answered yet (from what I could see):
what if there is a tie on the day... who wins? first to guess that date? closest on time (which wasnt one of the origional guessing requirements)?
or will there be multiple sets of servos getting handed out to everyone with the correct guess? :) :)
thanks!
roger008 03-31-2004, 11:24 PM i go for march 29, regards;
CNCadmin 03-31-2004, 11:27 PM Originally posted by nicad
CNCadmin-
hasn't been asked or answered yet (from what I could see):
what if there is a tie on the day... who wins? first to guess that date? closest on time (which wasnt one of the origional guessing requirements)?
or will there be multiple sets of servos getting handed out to everyone with the correct guess? :) :)
thanks!
If their is a tie of more than one, than only those who tied will be allowed to pick another target date for xxx amount of members given.
ahaddasi 03-31-2004, 11:31 PM 15th April 2004
Addasi
lorena 03-31-2004, 11:46 PM April 15,2004
cbcnc 03-31-2004, 11:56 PM April 18, 2004, 3:15pm PST - CBcnc
Mr.Chips 04-01-2004, 12:04 AM April 21st 2004. 1:30PM.
Hager
parminder 04-01-2004, 12:06 AM 7 may 2004
HomeCNC 04-01-2004, 12:22 AM Wow! I see many first time posters here now. I'll bet the registered number jumped after this post :D
brunom 04-01-2004, 01:01 AM 11 may 2004
greeny 04-01-2004, 01:03 AM May 15, 2004
cnczoner 04-01-2004, 01:18 AM April 19th. If it comes down to time, then 8pm.
morrissp 04-01-2004, 02:04 AM April 27th for me
ytsudwas 04-01-2004, 02:07 AM april 29 2004
TPPJR 04-01-2004, 02:26 AM June 26, 2006
aconde 04-01-2004, 02:27 AM April 30th , 2004
kenbeth 04-01-2004, 02:37 AM may 3rd 2004
maxpower 04-01-2004, 04:38 AM may 6, 2004 :confused:
p.breck 04-01-2004, 04:42 AM 28 May 2004
eaglevmc 04-01-2004, 04:46 AM I think it will be.......July 5, 2004
jmbeer 04-01-2004, 05:47 AM I'll take April 21, 2004 @ 8:59:30PM
Chombie 04-01-2004, 06:05 AM May 8th 2004
denran 04-01-2004, 06:11 AM July 23rd 2004
mastercnc 04-01-2004, 06:17 AM 07/20/2004
sdwilson 04-01-2004, 06:21 AM May 10, 2004 (4:20 pm)
mikie 04-01-2004, 06:58 AM july 15th 2004
Bill James 04-01-2004, 07:16 AM April 6th 12:01pm
MikeT 04-01-2004, 07:41 AM April 28, 2004
quint 04-01-2004, 07:51 AM May 07, 2004
N5UWP 04-01-2004, 08:09 AM June 7 2004
Bryan
xkbal 04-01-2004, 08:50 AM April 11 2004, 5 pm
mdarmistea 04-01-2004, 08:53 AM April 15, 2004
Oopee 04-01-2004, 09:01 AM May, 9th 2004
mdarmistea 04-01-2004, 09:03 AM I've seen a couple comments about all the first-time posters popping up out of the woodwork... perhaps they are like me, been a member for awhile, read the posts, but had no pressing need to reply to any of them. There's a lot of great information on these forums, it would probably turn it total mayhem if all 3400+ users were very active!
Scott V 04-01-2004, 09:09 AM April 5 2004
redbaron 04-01-2004, 09:13 AM April 10th 5:00pm
Semesa2 04-01-2004, 09:17 AM April 10, 2004
KevinS 04-01-2004, 09:42 AM may 23, 2004
wango 04-01-2004, 09:57 AM April 15th 2004
ehiebert 04-01-2004, 10:04 AM Cinqo de Mayo (my birthday also 5/5/2004)
Dario 04-01-2004, 10:11 AM May 25th
ccoleman 04-01-2004, 10:22 AM 4/25/04
Johngil 04-01-2004, 10:34 AM April 6, 2004 @ 4:30 PM
I.C.O.N. 04-01-2004, 10:45 AM April 13, 2004
NEATman 04-01-2004, 11:38 AM April 23rd 2004
HomeCNC 04-01-2004, 12:00 PM There was a few questions about what they looked like and how much are they worth. I have a set of three on ebay as we speak. I start them at $200 but I usally get between $230 and $250 for three.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3806755857&category=42895&sspagename=STRK%3AMESSE%3AIT&rd=1
http://www.homecnc.info/ebay/motor1.jpg
rickmantoo 04-01-2004, 12:07 PM April 6 is the day
cspmiata 04-01-2004, 12:18 PM april 24 2004
Loffy 04-01-2004, 12:31 PM April 5th 2004
12PM
h3ndrix 04-01-2004, 12:38 PM April 7th, 2004 8 pm
samualt 04-01-2004, 01:05 PM April 14, 2004
CNCadmin 04-01-2004, 01:10 PM Check out our classified section as well guys- http://cnczone.com/modules.php?s=&name=Classifieds
birdmun 04-01-2004, 01:10 PM July 15, 2004
cellis4766 04-01-2004, 01:52 PM June 17th, 2004 - Just a guess anyway...
july_favre 04-01-2004, 02:15 PM April Three
DeepWoods 04-01-2004, 02:46 PM May 9
starCNC 04-01-2004, 02:51 PM april 2, 2004 (8:00pm EST)
JFettig 04-01-2004, 02:53 PM 4-4-04 3pm
starCNC 04-01-2004, 02:55 PM Originally posted by HomeCNC
There was a few questions about what they looked like and how much are they worth. I have a set of three on ebay as we speak. I start them at $200 but I usally get between $230 and $250 for three.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3806755857&category=42895&sspagename=STRK%3AMESSE%3AIT&rd=1
They are nice, what kind of encoder are they? Do you sell just the encoder? if so how much?
StarCNC
landart 04-01-2004, 02:59 PM may 4th
icecube 04-01-2004, 04:06 PM May 3, 2004
crothefj 04-01-2004, 04:27 PM May 4,2004
sdigeso 04-01-2004, 04:27 PM 5.1.2004
Wannabe 04-01-2004, 05:03 PM 4/4/04
TyRex 04-01-2004, 05:16 PM 4/5/04
peterklos 04-01-2004, 06:06 PM April 29 ( USA DATE )
Stephen 04-01-2004, 06:13 PM 27th April 2004
April 4 2004 7:15 P.M. GMT
seb fontan 04-01-2004, 07:23 PM 6/6/04
InventIt 04-01-2004, 07:58 PM Hmmm, let me think... How about...
Sat Morning 4/3/04 about 6:30 AM Eastern Time :)
Just a educated guess of course...
mmartin_4 04-01-2004, 08:39 PM may 5,2004
Paul_S 04-01-2004, 08:47 PM April 16th 2004
avsfan733 04-01-2004, 08:57 PM 4/11/04
hook'em 04-01-2004, 09:08 PM 6 july 2004
rrrevels 04-01-2004, 09:23 PM April 15, 2004
vladdy 04-01-2004, 11:00 PM should only be the third person to pick april 21, I'll go for around 9 pm [jest in case, ]
radio-op 04-01-2004, 11:17 PM 4/15/04
wakeboard 04-02-2004, 12:04 AM April 7th, 2004
Wakeboard
muzleldr 04-02-2004, 01:10 AM 4/03/2004@7:45 PM CST
arvidb 04-02-2004, 03:36 AM 5th of April - that's what I think!
CNCadmin 04-02-2004, 08:45 AM OK This contest is now on. In the event of a tie, those who tied will have to guess a date for the next target of 3600 members.
WallCrawler 04-02-2004, 10:55 AM I wish everybody best of luck.:p
|
|