Anybody with a post, or at least some programming info for a tosnuc 777 control please respond.
We are purchasing a used toshiba next week, and of course, new programs are required immediately!!
Any help at all greatly appreciated.
Simon.Canada

Maybe you'd like to give us some details, like ... is it a mill or a lathe? How many axes? I dont think you want us to send you a random post that's labeled "Tosnuc".

The more you give us, the more we can help.

Mike Mattera

A TOSNUC 777 CONTROL will read standard ISO (G code and M code.) It reads with or without a decimal point. eg: if you want an X coordinate of + one hundred millimeters it will read :X100 or X100.
If the post has trailing zeros (X100000) you would need to add the decimal point eg : X100.000 or it will think it is 100 meters, so an okuma or fanuc post will work fine.
you need a list of G codes as it has a lot of its own very cool canned cycles.
It has lots of other very cool stuff as well,I love em.