Hay ya guys just thought i would see if you guys would like a couple of pics of our big mill..Question is?? what was first the chicken or the egg???

http://img242.imageshack.us/img242/9431/shoppic3xj7.th.jpg (http://img242.imageshack.us/my.php?image=shoppic3xj7.jpg)

This is the biggest one we've got.A 6 pallet Mitsui Seiki Hu40A.
Not very big but a great machine.:)

The one pictured is a two pallet 3 axis mill.table size is 3metres by 5.5 metres.its also has differant heads.One is 1:1 spindle, 1:2 spindle a 45deg and a 90 deg.We also run a MAZAk 1850 Integrex which is a 5 axis job with room to swing the Alloy box pictured in the first pic.That box is 1300mm high total of 2500 long and about 1500 wide...

That IS big:D

nice to see your from sweden..My Step father is from there before he moved all the way down to the great NZ...Nice M/C Pictured!! we are currently thinking of getting a 20 palletec system.. ever have any probs with running out of tool pockets?

This machine have 120 tool pockets and it's full now.The tool robot is busy. I have 7 jobs in the machine right now.If you are planning on getting a 20pallet machine be sure to have a lot of tool pockets. ;)