dafowfidy
04-09-2007, 11:42 AM
Here is a rough layout of the SX3, this may be helpful to those of you who are waiting on your machine and want to look into making an enclosure.
|
View Full Version : Basic SX3 Layout dafowfidy 04-09-2007, 11:42 AM Here is a rough layout of the SX3, this may be helpful to those of you who are waiting on your machine and want to look into making an enclosure. InspirationTool 04-10-2007, 07:22 AM Edited... never mind... the problem is on my system, and seems to be related to recent windows upgrades..... -Jeff nagjames 04-11-2007, 10:39 AM Thanks very much for posting it! It imported great into Alibre. James dafowfidy 04-11-2007, 10:45 AM Your welcome, just a note, the base and the hole pattern should be correct since I had a print to go off of. But everything else is only close, all I did was took some quick dimensions to get a rough idea of the machine for an enclosure. SyilAmerica 05-10-2007, 10:31 AM Nice. Thank you. What program did you use to model this up in? dafowfidy 05-10-2007, 02:14 PM Delcam's PowerSHAPE I am still woring on how I want to build my inclosure, here are a couple of drafts. http://i153.photobucket.com/albums/s225/lonerIndustries/Rev2.jpg http://i153.photobucket.com/albums/s225/lonerIndustries/Rev3.jpg http://i153.photobucket.com/albums/s225/lonerIndustries/Rev4.jpg SyilAmerica 05-10-2007, 05:02 PM Nice work. What program are you using for modeling? dafowfidy 05-10-2007, 05:23 PM Delcam's PowerSHAPE ] Delcam PatathomeSittin 05-12-2007, 07:52 PM Would you mind If I put this file on our Web site in the Support area? dafowfidy 05-12-2007, 08:03 PM Feel free but note that besideds the foot print everything was simplt measured with a tape. |