Does anyone have a post for the Haas SL series lathes?

Neither does BOBCAD!!!

http://www.haascnc.com/default.asp?bhcp=1http://www.haascnc.com/default.asp?bhcp=1 (www.haascnc.com/default.asp?bhcp?=1)

I emailed BOBCAD all the info months ago per their request. No positive responses. Kinda sad. You'd think they would be all over it. HAAS is sort of popular.. : )

Originally posted by DEAN
I emailed BOBCAD all the info months ago per their request. No positive responses. Kinda sad. You'd think they would be all over it. HAAS is sort of popular.. : )

Have you talked to CNCDude (http://cnczone.com/forums/member.php?s=&action=getinfo&find=lastposter&threadid=2541) ?

He'll prolly be able to get some resolve on this matter.

'Rekd

I give up!! I will send them a program that was written with Geopath so they can use it as a cheat sheet or something. So0mething just doesn't sound right to me.

It's been a while since I have been up here but you shouldn't have a problem with the HAAS post you need. Call me today or when you get a chance at 877-262-2231 ext 12.
CNC Dude
Chris

Here it is...for 18

Instructions:

Download the file to your Desktop.
If you use windows XP and do not have WinZip installed
1. Right click on the file
2. Go to Extract All
3. Click Next on the first window
4. Click on the browse button, and select your C: drive or local disk
5. Click OK
6. Click Next

If you have WinZip installed on any Windows system
1. Open the file with WinZip
2. If you are in Wizard view, on the second window you will have a button that says "WinZip Classic", click on it
3. In the Classic view click on the Extract icon
4. Make sure the Extract to window says "C:\" or your maindrive address
5. Click OK/Extract

And here is the one for 19 as well.

Regards

Thank you!!!