I am ready to give up on my edditing attemps , if only for the time being. I am ready to pay to have the posted results appear "similar" to the sample below. It will be used by a Fanuc 11M without an automatic tool changer. I can supply more details when needed.

%
O4322
(SIDE PANEL B REWORK)
(PLUNG METHOD)
G53 Z0
G53 Y-40.
M0
(T68 EM REGROUND DIA .984 DIA C-BORE)
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S1200
G43 Z2. H68
M8
G73 X-80.327 Y8.15 Q.142 Z-.606 R.1 F12.
Y5.079
G80
M9
G53 Z0
G53 Y-40.
M0
(T69 EM DIA .812)
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S1200
G43 Z2. H69
M8
G73 X-80.327 Y8.15 Z-1.02 Q.2 R-0.7 F12.
X-75.6656
G80
M9
G53 Z0
G53 Y-40.
M0
(T66 BORE THRU DIA .816-.8155 )
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S1200
G43 Z2. H66
M8
G86 X-80.327 Y8.15 Z-1.006 R-0.580 F4.5
Y5.079
X-75.6656
G80
M9
G53 Z0
G53 Y-40.
M0
(T65 EM DIA .500 FOR .984 DIA C-BORE)
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S3500
G43 Z2. H65
M8
G0 Z0.11
G1 Z-0.596 F10.0
X-80.095 Y8.1327
G3 X-80.085 Y8.15 I-0.01 J0.0173
I-0.242 J0
X-80.105 Y8.17 I-0.02 J0
G1 X-80.327 Y8.15
Z-0.606
X-80.095 Y8.1327
G3 X-80.085 Y8.15 I-0.01 J0.0173
I-0.242 J0
X-80.105 Y8.17 I-0.02 J0
G0 Z2.
G80
M9
G53 Z0
G53 Y-40.
M30
%

Post a copy of your .pst file.
I will be happy to give it a try.

I have added an attachment of the generic post, ObrienDave. If you need anything else, let me know. Thanks :)

Sorry I spaced out on you.
I'll try to look at it this week

Spring is a busy time.

Well,
This is the best I can do without a copy of the MC9 file you used to create the toolpath.

I could not quite figure out how you got MasterCam to generate the toolpath for the 1/2 endmill.

There are a few minor inconsistencies in your code example that cannot be done in a .pst file.
Like Q and R not in the same order.
You get one or the other.

Please be VERY careful with the posted code until you are sure it works for you.
I will NOT be held responsible.

If you need other changes please feel free to ask.

%
O4322
( MPFANTEST )
(DATE=DD-MM-YY - 31-03-07 TIME=HH:MM - 09:49 )
G53 Z0
G53 Y-40.
M0
( REGROUND .984 TOOL - 68 DIA. OFF. - 68 LEN. - 68 DIA. - .984 )
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S1200
G43 Z2. H68
M8
G73 X-80.327 Y8.15 Z-0.606 R0.1 Q0.142 F12.
Y5.079
G80
M9
G53 Z0
G53 Y-40.
M0
( T69 EM DIA .812 TOOL - 69 DIA. OFF. - 69 LEN. - 69 DIA. - .812 )
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S1200
G43 Z2. H69
M8
G73 X-80.327 Y8.15 Z-1.02 R-0.7 Q0.2 F12.
X-75.6656
G80
M9
G53 Z0
G53 Y-40.
M0
( TOOL - 66 DIA. OFF. - 66 LEN. - 66 DIA. - .816 )
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S1200
G43 Z2. H66
M8
G86 X-80.327 Y8.15 Z-1.006 R-0.58 F4.5
Y5.079
X-75.6656
G80
M9
G53 Z0
G53 Y-40.
M0
( TOOL - 65 DIA. OFF. - 65 LEN. - 65 DIA. - .5 )
G54
G0 G40 G80 G90 G98
G0 X-80.327 Y8.15 M3 S3500
G43 Z2. H65
M8
G0 Z0.11
G1 Z-0.596 F10.
X-80.1068 Y8.1301
G3 X-80.085 Y8.15 I0.0018 J0.0199
I-0.242 J0.
X-80.105 Y8.17 I-0.02 J0.
G1 X-80.327 Y8.15
Z-0.606
X-80.1068 Y8.1301
G3 X-80.085 Y8.15 I0.0018 J0.0199
I-0.242 J0.
X-80.105 Y8.17 I-0.02 J0.
G0 Z2.
G80
M9
G53 Z0
G53 Y-40.
M30
%

From a PM

The MPFAN 9 post that you edited for me seems to work fine. I haven’t had time to test it to the 3rd deg. but it looks promising.

In my request for help I offered to pay for help. Your help was valuable to me and I want to pass on my good fortune. If you would like a check that will be fine with me. If you are well off and don't need the cash, I could make a charitable donation in your name, and send you a tax-deductible receipt. ADRA is one of my favorite charities. Just let me know what suites you best.
Thanks Again,
Perry L *Last name removed*

Thank you for your kind words.
No payment is necessary.
I do this for free because I have spent a LOT of time and a LOT of money learning what I know.
I do not want to see anyone going through what I went through to figure this stuff out.
My "payment" is in helping others and seeing the spark of understanding when they comprehend what I am trying to teach them.
Knowledge is power.
You can "pay" me by passing on your knowledge to someone else.
Like the movie title from a few years ago, "Pay It Forward"