The Larken Router forum is now back after being gone from CNC Zone for a few years.
Larken Automation is in its 18th year manufacturing CNC routers, with many more to come.

I will be linking this forum to our website www.LarkenCNC.com so it may grow to help support the many Larken customers in the USA, Canada and around the world.

Larry kenny
Larken Automation

I can't find the 600LS machine on the site, should I be looking somewhere else?

We don't make the System 600 any more. There is a picture on one in the Used machines page.
We do make a 5' x 10' table called the System 120 now though available in servo or stepper.

I'm looking at purchasing a 600 ls that was purchased in Oct. 2001. Can I still buy parts (if needed) and get tech support for this machine? I've only read good things about your company and products. Where could I find a spec sheet on this machine? I also don't see a used machine page, maybe I'm just missing it.
This machine has a 3.25hp Elte spindle. Will I be ok cutting up to 3/4" plywood with it? At this time it would only be used est. 10hrs a week.

Thanks for info and help.

Yes, we made the double leadscrew machine about 4-5 years ago. Its not the fastest machine, but cuts well.