I couldn't find anything in searches, and the various manuals don't get specific enough. If one of you X2 or X3 owners could measure the mounting locations on your mills for me I would greatly appreciate it. Trying to sketch up setups for my 2 options and determine what I can fit comfortably. I appreciate it guys.

I assume you mean the holes in the base for bolting it to a bench?

The "Mini Mill Users Guide" at Littlemachineshop gives dimensions for the holes and suggestions for clearance around it.

Hope this is what you're looking for.

Mike

Excellent - thanks much! Knew it had to be around somewhere, just needed direction. :)