matt88
03-09-2007, 08:18 AM
I have a 22-16 fadal with 88hs control and the slide hold keeps activating on its own during the run cycle. any ideas?
matt
matt
|
View Full Version : fadal slide hold turning on matt88 03-09-2007, 08:18 AM I have a 22-16 fadal with 88hs control and the slide hold keeps activating on its own during the run cycle. any ideas? matt IN2GLAMISGIRL 03-09-2007, 11:04 AM Do you have a door interlock problem? Neal 03-09-2007, 12:36 PM If it is the "EXT HOLD" message that is coming up, then you door interlock switch ing breaking contact. Perhaps the doors have vibrated open some or are mis-aligned. If the missage is "SLide HOLD" then perhaps you have a shorting wire of bad hold switch. Neal matt88 03-10-2007, 07:55 AM I don't have the door interlock connected. It has run for about 6 months like this without any issues. And unfortunatly I dont get an error message of any kind the machine just goes into slide hold. spindle stays running. All i do is hit START and it continues as normal. ????? thanks for the replies. |