How does one turn on the WCS box. I've finished reloading X sp0 twice and it does not appear.

Hans
Albany, Oregon

Hans,

See attached picture. If you click on the words "WCS" at the bottom of the screen, you will see a menu with the choice "View Manager". Select View Manager.

If you cannot see "WCS" on a new install, your monitor resolution must be set to a value that is not compatible with Mastercam. (1024 x 768 minimum...1280 x 1024 recommended)

I use the WCS so often that I have mapped the View manager to my Right-Click menu.

Click the picture for a better look.

http://img208.imageshack.us/img208/7048/40047863kd2.th.png (http://img208.imageshack.us/my.php?image=40047863kd2.png)

Wrong box, what I am referring to is the light colored box in the center of the screen that the XY planes cross thru. I have the one you referenced, my screen resolution is set for 1280 x 1024 .

I am confused now...

Like this ?

http://img148.imageshack.us/img148/9526/36306706oj6.png

Or this ?

http://img148.imageshack.us/img148/1388/91395484np1.png

Are you talking about this the WCS Icon? If so here is the toggle for it under Setting and config.
Now you need to update past the MastercamX Spo being the first release.