Legion99999
02-25-2007, 10:00 PM
As it turns out some problems that i have text, is that my Y axis is acctually reversed.
Anyone know how to change this? Is it in the mach 3 software?
Anyone know how to change this? Is it in the mach 3 software?
|
View Full Version : Y axis reversed Legion99999 02-25-2007, 10:00 PM As it turns out some problems that i have text, is that my Y axis is acctually reversed. Anyone know how to change this? Is it in the mach 3 software? 307startup 02-25-2007, 10:08 PM Gee, Legion99999... I thought your SYIL was a GREAT machine...no spindle control and your Y axis reverse...sounds like a beautiful piece of engineering. And I'm a jackass... Legion99999 02-25-2007, 11:22 PM Dude you are a jackass. lol Gee, Legion99999... I thought your SYIL was a GREAT machine...no spindle control and your Y axis reverse...sounds like a beautiful piece of engineering. And I'm a jackass... IM sure its something i have done trying to learn the machine, and yes im all ready making money on the machine and syil has already been in contact with me. I have absolutley no complaints on the support and response i have got from this company.:) I would recommend them to anyone. The maxnc's i had before this were american made and had horrible support and much worse problems. 9 out of 10 cnc problems are operator related Some of us actually try to learn to utilise our machines to their full potential. DO you even have a machine or just cruise the forums looking to pick a fight from behind a keyboard? So in answer to your rant yes you are a jackass. My advice to you is to grow up, buy a machine, american if you can afford it, learn how to use it and show us up with your great products.:rolleyes: Step up or shut up kid.:) InspirationTool 02-26-2007, 06:04 AM You can change axis direction in all CNC control software. I'm not sure where the setting is. Make sure you be careful of the homing/limit direction as well. You wouldn't want it shooting off the other end of the dovetail. Go slow the first time. -Jeff Legion99999 02-26-2007, 12:45 PM Yep talked to richard and he fixed me all up. I had reversed my y axis. Text looks great now. Flatline's Up! 02-27-2007, 08:43 AM Legion... what was the answer for us that follow in your footsteps? ;) Thanks man, FL^! Legion99999 02-27-2007, 02:02 PM Well, first off al i most likely sabotagued myself so its unlikely that you will have the same problem but if you do find you have a reversed axis go to your config menu, select homing/limits, and reverse axis of whatever axis you need to flip. metalworkz 03-03-2007, 11:43 PM Hi, You might need to select 'home negative' also under the homing/limits tab for that axis or the axis may tend try to home at the wrong end. |