What's the best method for machining this path emboss in Bobart? It's aprox 5in X 2.5in... V cutter? I'm having trouble with the setup inside of Bobare specifically. Anyone have experience using it? How would you set this up to mahcine on a .25 X 6 X 3 in part for example? I'm just about ready to eat the pages of the bobart manual to get some more substance from them :-)

Zipped file to get it to fit on the post -

What's the best method for machining this path emboss in Bobart? It's aprox 5in X 2.5in... V cutter? I'm having trouble with the setup inside of Bobare specifically. Anyone have experience using it? How would you set this up to mahcine on a .25 X 6 X 3 in part for example? I'm just about ready to eat the pages of the bobart manual to get some more substance from them :-)

Zipped file to get it to fit on the post -

Have you posted here http://cadcamtrainer.com/forums/index.php and here http://216.117.147.20/bobcadsupport/forums/index.php too?

I bought BobArt ProX to play with but haven't done that much with it. Try posting in those forums and someone will be able to help you. Actually most of those members are here too but it is best to post you question everywhere.

Is this what you want? Follow this link http://cadcamtrainer.com/forums/showpost.php?p=2983&postcount=58

The Zip I saved wouldn't upload here so I put it on Sorin Nenu's Forum CAD/CAM Trainer. I think your a member already but if you aren't, just register . Your file is waiting for you. I hope you have a fast internet connection because the zip is 3.16MB.

Don't understand why it wouldn't load here.

Thanx Tpby, I'll go log on over there and check it out ( and make a post). The Bobart portion of the the program has been a bit tricky.

Thanx Tpby, I'll go log on over there and check it out ( and make a post). The Bobart portion of the the program has been a bit tricky.


Yes it is. I really never use it but sure someone out there does that can really help you a lot.