I wondering if someone can help me edit my mpfan post to remove these lines of code.
/ N104 G91 G28 Z0.
/ N106 G28 X0. Y0.
/ N108 G92 X10. Y10. Z10.
Thanxs in advance
Lab

If you want to e-mail my a copy of your post I can take a look at it for you.

Thank you in advance. As I don't know your e-mail I have posted it here.
Any direction you could point me in would be very helpful.
Thanks in advance
Les
Here it is in text format.
Thanks in advance.

Please repost the file as a text file.
I can help you with this.

I got rid of those lines without altering my post......However I'm having one other problem
N108 G43 H0 Z4.7005
I'm wondering where the setting would be for changing H0 to H1?
Also the settings I've changed is this something I'm going to have to do evrytime?
Thanxs in advance
Les

Figured out how to change H0 to H1.
Thanxs for all your help!.

Look at the PSOF section to see how I removed the 3 lines.

Thank you for looking and fixing this post.....Would you be able to tell me how to convert this txt file back to a working post file?
Thanks in advance
Les

Change the file extension from .txt to .pst and place in the Mcamx\Mill\Posts folder.
Be sure to save your original somewhere else.
Your welcome.