BAD DOG
02-12-2007, 06:08 PM
Need Sample Program ;
Milling 1.0 Square With .03 Corner Radius On All 4 Corners.
Milling 1.0 Square With .03 Corner Radius On All 4 Corners.
|
View Full Version : Dawoo 240msb C-axis Program Help BAD DOG 02-12-2007, 06:08 PM Need Sample Program ; Milling 1.0 Square With .03 Corner Radius On All 4 Corners. dcoupar 02-15-2007, 01:44 PM Maybe this will help. BAD DOG 02-15-2007, 02:14 PM Thanks; Found Out I Was Programming To Part Dim. Using Cutter Comp Instead Of Cutter Center. Do You Know Some Software ? I Want To Start Milling Some Complex Shapes. Bad Dog dcoupar 02-15-2007, 02:41 PM I use Esprit 2007. jdr1961 02-15-2007, 06:45 PM EdgeCAM is an excellent choice for Turn/Mill equipment. Easy to learn and use, plus powerful! Steelydan 02-21-2007, 08:15 AM Dcoupar- What's your opinion of esprit? dcoupar 02-21-2007, 09:31 AM I find it frairly easy to use, powerful, and the posts are customizable. Steelydan 02-23-2007, 02:53 PM Does any one have a proved out mastercam post for the Daewoo 240msb 18iTB ? |