Help I am looking for drawings or plans to make a Potts drill grinding jig
This jig is probably an English or British made attachment
Tnx KOKELOL

Hi Kokelol,

I found your post while also looking for plans for the Potts! I liked the Forum so much I joined and this is my first post.

The Potts drill grinding jig was ( I am fairly sure ) described in the Model Engineer magazine along with a simple drilling spindle for a lathe cross slide which also bore the name Potts.

There is a drill jig listed in the plans service run by the publishers of the magazine and although it is a Potts, it is very similar and it was designed by a chap called Ian Bradley who I think also wrote under the pseudonym of Duplex.

Try this link anyway and see if that jig will do what you want:

http://www.myhobbystore.com/ProductDetails/mcs/productID/2669/groupID/5/categoryID/101/v/909bfe0e-6b00-4927-9c7c-13e89869c310

Best of luck and let us know if you do come across the original thing.

Regards,

Piper2007