Need urgent help for a Tria 7500 controller. Back-up batteri is gone dead, so the controller lost all data. Need help for the procedure to reinstall data. Got disk whith all data on (original) but need help step for step.(flame2)

I have the steps and the disk.. of the Tria-7500
but my Machine it's an Author 504K

And I don't know... if they are compatible......

Thank`s for the reaktion. It is working on a 503 STC, and we are now running again. The codes to be set is diffrent on the 2 maschines. For a Author 503 STC is it 1194121 space 1195457. I hope it can be usefull for others.
Stoned.

I have a morbidelli 504k and I need PLC and wakeup code . Thanks

Hey Ronnieworks.
I have got both code and procedure to load plc files agin. If i get your mail address i will send it to you as attached word file. You probartly forgooten to renew the back up battery, i tried it myself.
Best regards: Stoned

Hey Ronnieworks.
I have got both code and procedure to load plc files agin. If i get your mail address i will send it to you as attached word file. You probartly forgooten to renew the back up battery, i tried it myself.
Best regards: Stoned

ronnie_52132@yahoo.com Thanks

Is your 504k with a twin pack and tool drawer if so could I get the plc and parametors and wake up code.

Have codes and reload procedure for Author 504 and Author 503. email me at jgriminger@wallsforms.com

NEED HELP with sizing on Morbidelli Author 503. Keep getting error 547 (Magazine Draw Back) when the machine DOES NOT have a tool magazine. jgriminger@wallsforms.com

bonjour

j'ai ma disquette parametre "HS" et doit les recharger sur la machine
est ce que quelqu'un a ces parametres.
merci