hi all

am looking to put together a 3 axis mill for not much ££ any ideas are very welcome

thanks fenton

Hi Fenton,

well I think you are at the right place over here!
try and look at the jgro of joes design..
it's of wood, pipes, (cheap) bearings..
it's a great design!

Hope you will find here what you are searching for* ;)
*(i bet you will)

Hi fenton

welcome to cnc zone there are lots of good info on this forum have a look at the hobbycnc.com I built my cnc with the 4 axis chopper package with 200oz steppers it runs my 1mx2m router and my fame cuter

Fenton,

Welcome, Lots of folks here to help you with everything. Just ask!!

hobbycnc.com is a good start.