One of the machinists I work with just bought a Hiraoka Kogyo Co. LTD Mill. It powers up and you can input lines of code. You can not input 2 axes of movement at the same time (no circles not even a linear X-Y move). There is no manual with the machine.

Here are the things I know:
Model #: 2MF-SCV
Machine Built in 1992
On the control it says Hiraoka Scalematic
When you power it up it says Hiraoka Pulscale
The board inside the control is a CK38C
Main board # is CK0008

I would really appreciate any information that anybody can give me on this. I did some online searching and come up with practically nothing.

Thanks for the help.

Nick