Genuine Bishop Wisecarver Vee track for sale + possibly bearings as well.

Hi,

I have two(2) lengths of 3.5meters (total 7meters)of "GENUINE" Bishop Wisecarver Hardened Vee Rail/Track for sale. It is number two size. If anyone knows what these are, they know that they are worth a small fortune.

Hardly been used, I actually bought too much of this. I had my machine set up so that there was a top and bottom vee rail. But my gantry is very heavy and the motor is spring loaded which pulls the gantry down onto the top vee rail. So I do not need the two lengths that were on the bottom.

www.bwc.com


I also might be thinking of selling four(4) matching vee bearings to go with them. Two have the concentric bushings and two have the essentric bushings.

The vee rail has holes drilled all the way along their lengths. I had to do all this as they wanted about $7 machining charge for each hole to be drilled.

There is enough track to make a couple/few machines depending on your size.

I am located at Withcott, near Toowoomba, Qld, Australia.

If any one is interested please email/PM me with an offer.

Cheers,
Peter

apalais@supernerd.com.au

Sold on eBay for $150 AUD.

Peter
Australia