Thanks to allfor the response to my last post .Here is my resume.
Dave.

Email hpotts6@netzero.net

I have been a C.N.C. machinist for about ten years. Most of my experience has been on vertical CNC mills with some lathe set up and operation. I have strong inspection and program editing skills, and I am currently learning Surf cam Velocity 2 programming software.


Employment History




Norfield Industries Inc.
P.O.Box 459
Chico Ca 95927
Contact: Dan Bird
Tel: 530-891-4214
3/06-Present

I operate and set up C.N.C. mills Mazak, Akira, Fadal, Tree, and Mazak C.N.C lathes. I mostly run production, but occasionally do prove out prototype programs.

Spectra-Physics Lasers
Contact: Mel Love (Production Supervisor)
2001 Challenger Way
Oroville, CA 95965
Tel: 530-532-6148
9/00-2/05

I operated and set up C.N.C. mills (Matsuura VM600, 800,and Ra3s. I was responsible for producing precision machined laser parts, and for the overall quality and esthetics of the parts produced. I have been a shift supervisor when an extra shift was needed, and have worked with the engineering department to prove out and develop new product lines. I left Spectra –Physics because they were closing the Oroville facility.




Royalguard Vinyl
Contact: Jimmy Wright (Production Manager)
850 Hwy 77 East
Newbern, TN 38059
Tel: 731-627-2775
5/00-8/00

I was an assistant supervisor. I would help with overall decision making as far as product and personnel placement as well as filling in for supervisors during their off time. I assisted operators with start up, shut down, and trouble shooting of vinyl co-extruders. I was responsible for the overall quality and inspection of the product as well as proper packaging.

Owens precision Machining
Contact: Walt Owens (Owner)
5966 Morgan Mill Rd.
Carson City, NV 89706
Tel: 775-883-4690
1/00-5/00

I operated and set up C.N.C. mills. I was responsible for producing precision machined parts. I was responsible for the overall quality and esthetics of the parts produced.

R.J. Foster Precision Machining
Contact: Bob Foster (Owner)
73 Laxalt Dr.
Carson City, NV 89706
Tel: 775-246-0300
1/99-12/99

I operated and set up C.N.C. mills and lathes. I was responsible for producing precision machined parts. I was responsible for the overall quality and esthetics of the parts produced I worked my way up to second shift supervisor before leaving to Owens’s Precision.

Royalguard Vinyl
Contact: Jimmy Wright (Production Manager)
850 Hwy 77 East
Newbern, TN 38059
Tel: 731-627-2775
9/97-12/98


I set up and operated vinyl extruders. I was responsible for the overall quality and inspection of the product. I supervised the packaging as well.

Northstate Precision Machining
Contact: Steve Tatum (Owner)
19 Carbon Circle
Oroville, CA 95965
Tel: 530-534-3966
1/97-9/97

I operated and set up C.N.C. mills and lathes. I was responsible for producing precision machined parts. I was responsible for the overall quality and esthetics of the parts produced.

Dyersburg Fabrics
Contact: Polly Gregory
1246 Phillips St.
Dyersburg, TN 38024
Tel: 731-285-6572
3/93-11/96
I was a quality inspector. I inspected rolls of fabric for defects, and entered results it to the inventory system via computer.

U.S. Army
B Co. 2-14 Inf.
Ft. Drum, NY
5/92-1/93
M203 gunner, Squad Leader, honorable discharge

Country Smorgy
2586 Olive Hwy.
Oroville, CA 95965
Tel: 530-534-9341
4/89-4/93

Assistant Manager, responsible for customer service, supervision of employees,
And bank transactions.


References

Available upon request