For those not familiar, hyperMILL is developed as a kernel and there is a unique integration strategy where hyperMILL is available within many CAD environments.

These are truly embedded integrations. You operate simultaneously in CAD and CAM. When the CAM function needs a surface or boundary curve, you select directly in the CAD system that is open and active.

Current integrations for hyperMILL include:

hyperMILL in Autodesk Inventor
hyperMILL in ProENGINEER Wildfire
hyperMILL in thinkDesign
hyperMILL/hyperCAD (standalone and OM CAD version).

We are in the process of ending our original flagship product, hyperMILL in Mechanical Desktop; and we will have a new integration available later in 2007.

There is a big hint on the OM web site! :D

Hi

I have access to both Inventor 10 and Hypermill 9 together with Hurco, Axe and Status and XYZ Machines.

I am proficent in Inventor and would like to be able to programme Hypermill from Inventor to complete the manufacturing process.

While I had some Hypermill Training - now mostly forgotten, as yet I have not cut any metal.

Please advise if there are available Procedures, Books, Tutorials or any other information that will enable me to cut metal with confidence.

Many Thanks