dango
12-25-2006, 02:31 PM
did someone install ncfadal on windows xp
I try it but long program can take 2 hours to load up
I try it but long program can take 2 hours to load up
|
View Full Version : Ncfadal on xp dango 12-25-2006, 02:31 PM did someone install ncfadal on windows xp I try it but long program can take 2 hours to load up fourperf 12-25-2006, 05:33 PM did someone install ncfadal on windows xp I try it but long program can take 2 hours to load up I am using nc fadal on xp and it loads really quickly. maybe its a baud rate thing? happy holidays to all Mark SIERRAMACHINE 12-26-2006, 07:26 AM We have it on our shop PC with no problems. It is XP Professional though, perhaps there is a difference?? Best of luck! and Merry Christmas!! Neal 12-26-2006, 09:21 AM Dango-- The speed of data transfer is a function of the Baud Rate and your I/O card. The fact that data was transferred tells me that NC Fadal is working as it should. Neal MoldMaker 12-26-2006, 10:53 AM Question for Neal. I have a 6535 18i with Data server and expanded memory 980k. What is the setting I need to be able to drip feed from the dataserver drive? I think #5 is from Memory #4 is from Memory card (onfront) "Run from Remote." Thanks Ken dango 12-26-2006, 05:26 PM the problem is not sending to the machine the problem is that when I open small program on the NcFadal it load the program fast but if the program is 3MB it can take 2 hours I know that I read somthing about win 2000 problem Neal 12-26-2006, 06:14 PM I know of no specific problem with Windows 2000 regarding data transfer. What baud rate are you using? If your computer will take the speed try 57,600 baud to reduce the time. Long files do take time to transfer! That is the reason that the RS-232 protocol is becoming a thing of the past. Neal dango 12-29-2006, 09:32 AM Maybe I did not explain my self good enough My problem is not sending to the machine Before sending program I need to call it I click on the file then open there is the problem In long program I need to wait 2 hours Israel 01-26-2007, 07:32 PM hi, friends, i really really have a bad problems of comunication whit my CNC´S, i still work whit Assist of Fadal, any one can help me, to send me the NCFADAL from my email israelorama@gmail.com, thanks so much. Neal 01-28-2007, 09:18 PM Israel-- The Fadal NC Fadal software is NOT shareware. It can be ordered from your local dealer or from Fadal Parts Dept for approx $200.00. Neal roseng 02-11-2007, 10:46 AM Maybe I did not explain my self good enough My problem is not sending to the machine Before sending program I need to call it I click on the file then open there is the problem In long program I need to wait 2 hours Ive seen this before, try turning off windows firewall. |