|
View Full Version : a DXF in the FTP area inthedark 02-06-2004, 09:43 PM I have uploaded a DXF file. Anyone want to give me a quote for 10 and 20 of these? The side view did not come out good in the conversion, it's .7" tall total. The lip or shoulder which has a radius of .75" is .09" thick. Thanks, Kenny keithorr 02-06-2004, 10:08 PM Is it a bushing like this? CNCadmin 02-06-2004, 10:16 PM Sent you a Pm. inthedark 02-07-2004, 10:41 AM That is it Keith thanks, Kenny CNCadmin 02-07-2004, 11:48 AM Is this what your looking for? inthedark 02-07-2004, 11:58 AM That looks good CNCadmin 02-07-2004, 12:14 PM What is the material? inthedark 02-07-2004, 12:22 PM oh, sorry 1020 low carbon steel, CNCadmin 02-07-2004, 02:43 PM Why 1020? Will 1018 work? inthedark 02-07-2004, 07:32 PM 1018 is fine, I don't know why I put 1020... Thanks inthedark 02-16-2004, 09:03 AM This has been quoted and accepted, thanks for your time... SWHITE 03-10-2004, 10:01 PM Originally posted by inthedark I have uploaded a DXF file. Anyone want to give me a quote for 10 and 20 of these? The side view did not come out good in the conversion, it's .7" tall total. The lip or shoulder which has a radius of .75" is .09" thick. Thanks, Kenny |