Switching horses (in the middle of the stream). Have vinyl cutting sortware but no machine, and a homemade CNC router with no design software! FlexiSignPro 7.6v2 is a top-of-the-line program for vinyl cutters, large format printers, and some other signmaking/production equiptment. I have decided to go a different direction so now I need some kind of 2 to 2.5D software to design and route. Am using Mach3 (altho I don't understand most of it) with Geckos. I'm not sure what kind of software I need, something simple and semi-powerful :) if there is such a thing!