Just had a spindle rebuilt in my Tree 750 VMC w/ PC2100 control. I am wondering if anyone knows how to reorient the spindle for a tool change. I would like to avoid dissasembling it again, and thought there might be a way to program it.

There is a value in one of the pages.. More>system config>machine application (or servo) It will either be align trim value for C axis or orient offset (or something like that)

Found it under AUTO TOOL CONTROL, it was just a degree dimension. I used guess and check to get it oriented correctly. Works better than before. Thanks

Cool, glad you got it.

Bob