|
View Full Version : You can Rent DIY Videos ! Switcher 12-09-2006, 09:44 PM I found this site that you can rent diy videos, I havn't tried it, but it looks good! Link: http://smartflix.com/index.php?main_page=index&cPath=115 . Switcher 12-09-2006, 10:25 PM Free Machining Videos. http://www.cerritos.edu/nreal/student_grades.htm . Switcher 12-09-2006, 10:33 PM More Free Machining Videos. http://www.me.gatech.edu/jonathan.colton/me4210/mfgvideos.html . txcowdog 12-10-2006, 12:36 AM Wow! There is a goldmine in those .edu sites. Thanks for the great links. akraven 12-10-2006, 12:43 AM I have used smartfklix (used to be technicalvideorental.com) and have had very good luck with them. Huge selection on many subjects and fair rates. akraven Louis Roy 12-10-2006, 01:53 AM Great tips on the two free sites, useful info. thanks for the heads up Switcher mog5858 12-10-2006, 09:21 AM all i can say i thanks u must have spent some time fiding these grate sites and your are nice to share thanks so much. thkoutsidthebox 12-10-2006, 09:35 AM :cheers: Great sites switcher. :) cncbob 12-10-2006, 12:41 PM Great job! I have been looking for these types of instructinal videos for quite some time. Thanks for sharing!!!! Coinbird 12-11-2006, 01:14 AM I rented "The Milling Machine and Its Uses" as well as the first 3 volumes of mini-milling instruction (I don't recall their titles offhand.) The mini-mill DVD's were of better production quality, but the "Milling Machine and Its Uses" dvd was 4 hours and quite useful to me, as a *complete beginner* machinist (I got an excellent deal from a friend on my mini mill.) My goal is convert said mill to CNC, but obviously I need to master the basics to be able to build the required parts. I hope Smartflix can expand their library rapidly. The milling videos I have seen are very well made. watzmann 12-11-2006, 04:09 AM nice work :) tariq 12-11-2006, 03:56 PM waw viry nice sprout 12-13-2006, 10:29 PM Thanks,I have see some of the videos .It's very nice.:rainfro: |