Hi all,
is there any way to rotate the solid model on XZ ro YZ plane?
Thank you

Change your c-view before rotating. make your actual view the same as your c-view the first few times until you understand how it works. the direction you choose to rotate the part will be counterclockwise for a positive angle, clockwise for a negative number based on your c view. You will also have to choose the point of rotation, be it a corner of the part, coordinates or a center of a line or arc, etc...

Chris

looking at top. and you want it upside down, view front-transform-move-rotate visable-180 deg, now return to top view, (cview set at 0-same as current view)

got it
Thank you