I know this is probably one of the most asked questions after power supplies, but I am looking for bits for my (soon to be finished) router. Most of what I find are kits that have one bit that I want and 20 others that I won't ever use.

I would like to purchase slot drills, ballnose endmills etc all with 6mm shanks, varying sizes from about 2mm to 6mm dia.

Any assistance appreciated.

Almost forgot, Australian suppliers preferred.

Russell.

Russell...

I assume you are wanting to cut Metal.

You can purchase individual cutters from:

www.mcjing.com.au (http://www.mcjing.com.au)
www.minitech.com.au (http://www.minitech.com.au)

Both good companies to deal with.


cheers



I know this is probably one of the most asked questions after power supplies, but I am looking for bits for my (soon to be finished) router. Most of what I find are kits that have one bit that I want and 20 others that I won't ever use.

I would like to purchase slot drills, ballnose endmills etc all with 6mm shanks, varying sizes from about 2mm to 6mm dia.

Any assistance appreciated.

Almost forgot, Australian suppliers preferred.

Russell.

Should have mentioned I wanted woodworking bits...the mcjing site has pretty much what I was after, cheers.

Russell.

Many tradies use carb-i-tool. Its what you you'll find in Bunnings.

http://www.carbitool.com.au/products.htm

Andy

Thanks for the link Andy, downloaded the catalogue, lots of things to tell Santa about...

Cheers.

Russell.