Can you change a setting in the Centurion 7 on a VM30XP and RW20 control to alow to search more than 999 Events and how if you can
Thanks
Bill

Had to put this back on top. I know milltronics monitors this site and still no answer. Maybe I should start posting Problems with 2 machines less than 2 yrs. Old that to our good fortune they extened our warranties.

I am confused on what you mean on searching more than 999 events.
How are you trying to search?

green box that say n# . say for instance you have 2000 lines of code and you want to edit line 1999 the box will 0nly allow 3 digits
Bill

There is no option for more than 999 in conversational.
That is a lot of screens.
How many events do you have?
If you need to search for more I will put in a suggestion to engineering
Miltronics does not always monitor the site. I do it when I can. So if you need a Milltronics reply send question to service@milltronics.net

There are over 3000 lines We were making a mold proto type and imported cad to machine it. This was not a big deal I was just curious if it was a parameter setting I could easily change. You may want to suggest the change in the software to engineering. I managed and we do not use that many lines of code often page down to get that far just takes a little more time
Thanks
Bill