|
View Full Version : Help Need Manual For Richmill Cnc Indexer bigmark1972 10-12-2006, 01:58 PM I have looked absolutely everywhere and cant find a manual for my Richmill c5c indexer the control is a Richmill cnc 300 http://markleenheer.com/Controller.JPG If anyone can help I will be happy to pay for a copy, etc.... BMackinnon 10-13-2006, 05:24 PM The last shop I was at had that same model and manual, I rememeber looking thru it. I contacted them but they sold it to a CO. in Maine. I looked around on the net too .. couldnt find a thing. Hope ya get your hands on one. GeorgeR 03-30-2007, 11:46 PM Are you still looking for a manual - I just picked one up myself and have a manual for mine. I don't have a scanner, but I could probably take a photo of each page if you like (I've got a decent digital SLR). Bullet605 04-11-2007, 09:28 AM I am also looking for a manual for Richmill Cnc 30 indexer if anyone could come up with an extra copy I would also be willing to pay for a copy GeorgeR 04-11-2007, 06:35 PM I've put a pdf of my manual on our website - you can get it at: http://www.farmmap.co.nz/software/richmill.pdf Dave1 05-08-2008, 12:05 PM Do you people still need a manual for a Richmill CNC 30?? I finally got my hands on one in PDF format. PM me with your email if you'd like it. Dave Niezingerley 12-16-2008, 07:03 PM Hello. I ahve a Richmill CNC 30 4th axis indexer, and saw that you have a pdf of a manual for a Richmill controller. Is it possible that I could get a copy of that, please? Thanks for your time. Dave1 12-17-2008, 09:14 AM Hello. I ahve a Richmill CNC 30 4th axis indexer, and saw that you have a pdf of a manual for a Richmill controller. Is it possible that I could get a copy of that, please? Thanks for your time. Can't send it if I don't have an email addy:confused: Will get it out pronto when I have the address. Dave Niezingerley 12-17-2008, 10:15 AM Thanks for the response. Here is the e-mail.... mmetzinger@fairwaymolds.com Let me know what you would like for the copy of this pdf file... Thanks again... Dave1 12-17-2008, 12:15 PM Hehe, well, a million dollars would be nice:stickpoke Hope it works for ya:cheers: Dave JackP42 01-06-2009, 03:20 PM Hi Dave, If you still have it the pdf Richmill CNC 30 manual available, I would greatly appriciate a copy. I have sent you a personal message with my email address. Thanks in advance. Jack erniel 07-07-2009, 07:24 PM Do you have a pdf file for a Richmill CNC 30 I could get a copy of? I mostly need it for the wire diagram. The whole thing be a blessing. Thanks, E Dave1 07-07-2009, 08:58 PM Do you have a pdf file for a Richmill CNC 30 I could get a copy of? I mostly need it for the wire diagram. The whole thing be a blessing. Thanks, E Yes I do, need email addy and I can send it. Dave erniel 07-07-2009, 09:24 PM Thank you in advance. Ernie Lussi elussi@american-mico.com Dave1 07-07-2009, 09:57 PM Email sent. Dave erniel 07-07-2009, 10:00 PM Sorry, I just noticed that my email was wrong. it is elussi@american-micro.com. I forgot the r. Ernie Dave1 07-07-2009, 10:17 PM Resent Dave henriusa 02-24-2010, 12:04 PM Hello Dave. I have a Richmill CNC 30 -5c indexer without manual nor wiring diagram. Is it possible that I could get a copy of pdf manual, please? Best regards, Henri henriusa@gmail.com |